15 items
- List Selected
- Grid View Selected
Hide Filters XFilter Results
Activating the following links will update the content below
- 1
| Days to Ship |
|
|---|
-
Standard V-Pulley
NBK
Shaft hole, keyway and push screw machining standardized.
Features
· Japan's first standard inch size product.
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Imbalance mass allowance on outer circumference is 0.2% of pulley mass or 3g, whichever is larger.
· Same accuracy as the balance prescribed in JIS B 1854-1987, "General use V-pulley".* M-type pulleys are exempt.
Applications
· Fans, etc.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Bushing Pulleys
EVERON
Features
· Shaft hole, and keyway processing, etc. become unnecessary, and delivery date management becomes easyApplications
· For speed change by belt conduction.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Wedge Pulley
NBK
High-speed, high power transmission V-belt pulley that conforms with JIS B 1855.
Features
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Enables high speed and high power transmission to make it possible to design a system with a smaller pulley diameter, shorter shaft distance and fewer belts.
· Full lineup. 491 size. 3V: 153 size, 5V: 257 size, 8V: 81 size.
· 230 size has been added into JIS standard 261 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JIS B 1855-1991, "Slim V-pulley").
· Imbalance tolerance on the outer circumference guaranteed to be 0.1% of pulley mass.
Applications
· Fans, etc.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
JIS V-Pulley, B Type
NBK
Full lineup of V-belt pulleys that conform to JIS B 1854.
Features
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Shaft hole, keyway and push screw machining standardized.
· Extensive product range. 650 size. A: 146 size, B: 218 size, C: 212 size, D: 74 size.
· 369 size has been added into JIS standard 281 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley").
Applications
· Fans, etc.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
ISOMEC Polydrive Pulley
NBK
V-belt pulley with high power transmission and large rotation ratio.
[Features]
· High transmission efficiency. ISO 9982 compliant.
· Consistent production from casting to machining and surface treatment.
· Cell production method allows for production of many kinds of products in low volume, with short lead times.
· Allows for a high-transmission efficiency system with a small pulley diameter, short shaft distance and narrow pulley width.
・ Can be attached and removed from shaft and positioned with hex or socket wrench.
· Due to taper fit tightening effect, tightening force is equivalent to shrink fit. Achieves safe and reliable transmission.
· Set imbalance tolerance on the outer circumference to 1 g or 0.1% of the total mass of the pulley and bushing, whichever is larger.
· Balancing is adjusted using a balancing machine.[Applications]
· Automobiles, manufacturing machinery, air-conditioning equipment, electric tools, household appliances, etc.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 6 Days -
SNS Power Sheave 5V
Innotech
Groove Width: 15.2°0.13
Material: More than FC200
For complete product overview and details on SNS Power Sheave 5V see the sections below:Configure Now
Ships as soon as 6 Days -
Vankin Pulley VK
NBK
Lightweight V-belt pulley made of sheet metal.
Features
· Rotation molding method imparts a rigidity suitable for light/moderate load transmission in general industrial machinery.
· Pulley grooves are rounded with no sharp corners to avoid damage to the belt.
· Lightweight, so the entire machine, including base, pillow block, etc., can be made lighter and more compact.
Applications
· Fans, etc.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
SNS JIS V Pulley A
Innotech
Nominal diameter ø67 to 710, with 1 to 3 runners available in wide selection, good balance measurements, and directly usable on high speed rotator.
[Features]
· SNS JIS V pulley is a new addition to the mechanical series, with 360 types standardized, rotation ratio, distance between shafts etc. can be freely selected.
· Ingenuity has been applied to the shape design etc. to prevent damage to the shaft or bearing.
· Shaft etc. can be preserved, useful for saving labor.
· Can also be used for machines with heavy loads and shocks etc.
· High-precision machining, for good transmission efficiency, and regular rotation ration is achieved.
· As the SNS and JIS V-pulleys, on all balancing machine products, machine using aligned balance measurements, they have good quality high-precision and are directly usable on high-speed rotators.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
JIS V-Pulley, D Type
NBK
Full lineup of V-belt pulleys that conform to JIS B 1854.
Features
· Consistent production from casting to machining and surface treatment.
· Shaft hole, keyway and push screw machining standardized.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley").
· Imbalance tolerance on outer circumference is 0.1% of pulley mass.
· Surface treatment uses electrodeposition coating for improved rust resistance and a beautiful finish.
Applications
· Fans, etc.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
NS standard V pulley A
Innotech
Nominal diameter 2 to 24 inches, with 1 to 4 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable high speed rotator.
[Features]
· A wide range of model configurations: 95 A type, 132 B types and 102 C types, with pitches ranging from 2° to 30° and 1 to 6 grooves.
· High-performance, high-quality NS pulley is the safest and easiest to handle, due to uniform material and strong wall thickness.
· Dimensional precision to JIS reference standards, with thorough quality control.
· Groove part shape and dimensions table.
· Maximum speed: NS standard V-pulley is recommended to be of circumferential speed under 25 m/s specification.
· Recommended minimum pulley diameter: A type 3° or greater, B type 5° or greater, and C type 8° or greater.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
NS Standard V Pulley B
Innotech
• V-belt thickness (mm): 11
• Material: FC200- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
JIS V-Pulley, C Type
NBK
Top-quality pulley, with materials, machining precision and balance accuracy exceeding JIS standards.
Features
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Shaft hole, keyway and push screw machining standardized.
· A: 146 size, B: 218 size, C: 212 size, D: 74 size.
· 369 size has been added into JIS standard 281 size separately.
· Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Imbalance tolerance on outer circumference is 0.1% of pulley mass.
· Surface treatment uses electrodeposition coating for improved rust resistance and a beautiful finish.
Applications
· Fans, etc.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
SNS JIS V pulley B
Innotech
Nominal diameter ø118 to 900, with 1 to 5 runners available in wide selection, good balance measurements, and directly usable on high-speed rotator.
Configure Now
Ships as soon as 4 Days -
SNS Power Sheave, 3V
Innotech
JIS B1855 narrow width V-pulley dimensions adopted. Nominal diameters ø67 to 630, groove no. 1 to 6. Intermediate sizing also standardized. Wide selection, for easy design. Material exceeds FC200 (greater transmission capacity FC250)
- Volume Discount is available
Configure Now
Ships as soon as 6 Days -
STB Sheave 3V
Innotech
Groove Width: 8.9°0.13
Material: More than FC200
For complete product overview and details on STB Sheave 3V see the sections below:Configure Now
Ships as soon as 5 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Brand | NBK | EVERON | NBK | NBK | NBK | Innotech | NBK | Innotech | NBK | Innotech | Innotech | NBK | Innotech | Innotech | Innotech |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Series | Standard V-Pulley | Bushing Pulleys | Wedge Pulley | JIS V-Pulley, B Type | ISOMEC Polydrive Pulley | SNS Power Sheave 5V | Vankin Pulley VK | SNS JIS V Pulley A | JIS V-Pulley, D Type | NS standard V pulley A | NS Standard V Pulley B | JIS V-Pulley, C Type | SNS JIS V pulley B | SNS Power Sheave, 3V | STB Sheave 3V |
| CAD |
|
|
|
|
|
|
| ||||||||
| Days to Ship | 4 Days | 4 Days | 5 Days | 4 Days | 6 Days | 6 Days | 5 Days | 4 Days | 5 Days | 4 Days | 4 Days | 5 Days | 4 Days | 6 Days | 5 Days |
Loading...
- 1
